“Aqua P” Build – Part XII

“Aqua P” Build – Part XII

While the body and neck are drying I can devote a little time to the tailpiece. I didn’t want the traditional stop bar on this and nor did I particularly want the traditional trapeze metal tailpiece that is a feature of many guitars. Instead I opted for a wood and stainless steel tailpiece design that I use on many of my archtop builds.

tn_IMAG0381.jpg

The design is made from two blocks of rosewood with a threaded insert that allows the tailpiece to be threaded into an insert placed in the end of the body. The two parts of the tailpiece are held together using threads 3mm stainless rod and locking nuts.

A simple but effective design and easy to make.

tn_IMAG0358.jpg

I didn’t have any 3mm rod to hand but mocked up using a cello tail gut until the steel rod arrived. The finished tailpiece can be viewed in the gallery. The brass insert is shown above before it is inserted into the body where it is permanently epoxied into place.